MACNABB ARTS: Furniture Design

Custom Furniture Design

I can create custom furniture for your space. Please contact me for free design sketches and estimates.

macnabbarts@gmail.com

Out Door Lounger

steel frame with mahogany adjustable back rest.

Custom built in reclaimed kitchen wall shelf

I was contracted to create a built in shelving unit to fit this small cove in a clients kitchen

I found two 16" floor joists that had been salvaged from a minneapolis home. after a fair bit of sanding the wood was ready to cut and finish.

I needed to sister on a 2.5" strip of wood to get the overall shelf depth to 12"

I then applied 5 coats of a mate poly with sanding in between each coat.

Ready for final assembly.

The Shelf would be supported with black gas line that was cleaned and clear coated to keep from rusting.

The shelf had 8 3" plate flanges that secured it to the wall. It was a close fit with only .5" to spare on either side. fits like a glove.

Custom steel pot rack.

I designed this custom pot rack to fit over our fridge to utilize the space. The rack is constructed of 1x.25" steel bar and is supported with 4 hooks that I have bolted to the ceiling.

By modifying some S hooks each pot has a hanger that can be moved for a changing pot selection.

Wall mounted swinging task light.

I used 1/4" stainless steel rod and a aircraft cable. A plate is screwed to the wall and the arm is slipped into the corresponding eyelets that have been welded to the pate. This lets the arm and light swing from side to side and illuminate either the sink or work island.

I've strung a simple round lamp cord through the eyelets on the rod and added a glass shade.

North shore Driftwood accent lighting.

I found this piece of drift wood on a lake superior beach that I cut to length. I then was able to mill out a slot and insert a LED light bar to create a fun and unique light for our kitchen pass through.

By hardwiring the light I was able to add the switch to the main

light switch panel in the kitchen for a clean look.

Truss Coffee Table

hard maple,cherry,steel

Black and White Chair

Constructed of Baltic birch plywood with laser cut laminate inlay truss patterns with a

frame of milled steel

curved truss back supports

This is the first day of construction of a set of 2 High-top Bar Stools

cherry wood tops

Finished pair of Cherry Wood High-top Stools

Finished bar stool seats. Custom tree design laser engraved

Steel Frame Table Light (day1)

Wall Mounted "S" Shelf

Bending birch plywood and solid oak front with mahogany door pulls

Cherry Serving Tray with Brass Handles

before application of oil finish

custom designed laser engraved design into the surface of the tray

Finished cherry serving tray, with oil finish

Mail Box

steel frame with a custom engraved cherry wood front panel

Instructions will be included for easy home instillation

Custom House Numbers
The delrin numbers have been attached to a sheet of hand hammered copper. Numbers attached form the back with stainless steel machine screws to hide any visible hardware.